Adaptec 1966600 User Guide - Page 40
Replacing the Front Bezel, Connecting the Power Cords, Setting Up the DuraStor312R Storage Enclosure
UPC - 760884139202
View all Adaptec 1966600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
DuraStor 6220SS/7220SS Installation and User's Guide Replacing the Front Bezel 1 Ensure that the front bezel mounts to the two posts and that the bezel lip fits under the chassis top. 2 Lock the front bezel by turning the screws one-quarter turn to the right. Connecting the Power Cords Once the DuraStor RAID appliance is in place, the power cords can be attached and secured. 1 On the back of the RAID appliance, lift a security bale and plug in a power cord. 2 Place the bale over the cord. (This protects the power cord from accidental disconnection.) 3 Plug the other end of the power cord into a grounded outlet or UPS power strip. 4 Repeat this process for the other power cord. If you are installing the DuraStor RAID appliance only, go to Turning On the Power on page 3-54. Setting Up the DuraStor 312R Storage Enclosure This section describes the installation and set up of the DuraStor 312R storage enclosure. If you are installing the DuraStor 6220SS/7200SS storage subsystem, you should install the DuraStor RAID appliance before installing the DuraStor 312R. 3-6