Adaptec 1966600 User Guide - Page 44
Attaching a Disk Drive to a Drive Carrier, Installing Disk Drives
UPC - 760884139202
View all Adaptec 1966600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
DuraStor 6220SS/7220SS Installation and User's Guide 6 Secure the left side rail to the vertical member using the screws and nuts. 7 Repeat steps 6 and 7 for the other side rail. Note: Be sure that the enclosure is level. Check that you used mounting slots of the same height. Attaching a Disk Drive to a Drive Carrier 1 Place the disk drive component-side down on a flat surface, with the SCSI connector facing away from you. 2 Slide the drive carrier over the disk drive so that the handle of the drive carrier curves down and is facing you. See Figure 3-9. 3 Attach the drive carrier to the disk drive using six screws, three on each side of the drive carrier. Installing Disk Drives 1 Align the drive carrier rail with the grooves in the drive bay. See Figure 3-9. Figure 3-9 Installing a Disk Drive 3-10