Adaptec 1966600 User Guide - Page 64
Power on the DuraStor Storage Subsystem. See, Powering
UPC - 760884139202
View all Adaptec 1966600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
DuraStor 6220SS/7220SS Installation and User's Guide a On each end of the optical FC data cable and on the SFP optical transceivers, installed in the FC ports at the rear I/O panel, are dust covers to protect the optics. Remove these dust covers and store them in a safe place. DISK CH 3 DISK CH 2 DISK CH 0 DISK CH 1 Tx P-2 Rx Tx P-1 Rx Tx P-3 Rx Tx P-4 Rx SERIAL B SERIAL A Ext Int Install the optical cable in one smooth motion. Figure 3-26 Optical Fibre Channel Data Cable Note: Be sure to install the optical cables in one smooth, positive motion. b Connect the required FC data cables to the host system's FC host bus adapter port connectors. c Connect the other end of those FC data cables to the RAID appliance FC ports on the real I/O panel. 3 Power on the DuraStor Storage Subsystem. See Powering On on page 3-54. 4 Set the controller operating mode. For detailed instructions, refer to the user's guide for the storage management software tool you are using. 3-30