Adaptec 1966600 User Guide - Page 42
Mounting the Storage Enclosure on the Rack
![]() |
UPC - 760884139202
View all Adaptec 1966600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
DuraStor 6220SS/7220SS Installation and User's Guide Mounting the Storage Enclosure on the Rack The DuraStor 312R storage enclosure can be installed into any standard 19-inch rack. Installation tips: It will be helpful to have someone assist you. Also, make sure that the mounting hardware is easily accessible before you begin the installation. Note: If you are not installing your storage enclosure into a rack, skip to Connecting the Power Cords on page 3-11. 1 Remove the PSUs. See Replacing a Power Supply Unit on page 5-11. Warning: The PSUs must be removed prior to installing the RAID appliance into the rack. The added weight of the PSUs could damage the RAID appliance chassis during installation. See Replacing a Power Supply Unit on page 5-5 for detailed instructions. 2 Select a location within your rack. If you are installing the DuraStor 6220SS/7200SS, consider the placement in relation to the DuraStor RAID appliance and ensure that there will be adequate airflow for the front-to-side and side-to-side areas. 3 Place the DuraStor 312R storage enclosure in the desired position in the rack. 4 Secure the left and right front chassis ears to the rack's front vertical members using the supplied screws and nuts. See Figure 3-7. 3-8
![](/manual_guide/products/adaptec-1966600-user-guide-52b377a/42.png)