Adaptec 1966600 User Guide - Page 52
Stand-Alone Single-Port Mode, Power on the DuraStor Storage Subsystem. See
UPC - 760884139202
View all Adaptec 1966600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
DuraStor 6220SS/7220SS Installation and User's Guide Stand-Alone Single-Port Mode This operating mode is a low-cost entry-level RAID storage solution. Use this mode for maximum storage capacity with a single host computer. In this mode, the Host In (CH 3) port becomes a disk channel, providing additional storage capacity. 1 Connect the SCSI data cables as shown in Figure 3-16. HBA 1 (ID 7) Host Computer 3-meter Cable DuraStor SCSI RAID Appliance HOST 1 IN (CH 3) HOST 2 IN (CH 0) HOST 1 OUT HOST 2 OUT Disk CH 2 Disk CH 1 Serial B Ext Serial A Int HOST 2 IN (CH 0) Figure 3-16 Stand-alone Single-port Cabling Diagram Note: External terminators are not required for any stand-alone configuration. 2 Set the host system HBA to SCSI ID 7. Refer to your host system's user's guide for details on setting HBA SCSI IDs. 3 Power on the DuraStor Storage Subsystem. See Powering On on page 3-54. 4 Set the controller operating mode. For detailed instructions, refer to the user's guide for the storage management tool you are using. 3-18