Apple M3322LL/A User Guide - Page 25
Connecting the sound cable, Connecting your keyboard and mouse to the display
View all Apple M3322LL/A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Connecting the sound cable The sound cable on your AppleVision 1710AV Display is a split cable with two connectors, one for sound input and one for sound output. Plug these connectors into your computer if you want to use the built-in microphone and speakers on your AppleVision 1710AV Display. 1 Plug the connector (marked by ≈) on the sound cable into the sound input port (marked by ≈) on the back of your computer. ≈ Connector - Connector 2 Plug the connector (marked by -) on the sound cable into the sound output port (marked by -) on the back of your computer. Connecting your keyboard and mouse to the display If you wish, you can plug your keyboard and mouse directly into the AppleVision 1710AV Display, rather than into the back of your computer. There is one ADB port on each side of the display for your keyboard and mouse (or any other ADB device). IMPORTANT Always be sure your computer is shut down before you plug in or disconnect ADB cables. 1 Make sure the ADB connector on the display cable is plugged into an ADB port (marked by V) on the back of your computer. For more information, see "Connecting the Display Cable" earlier in this chapter. 2 If necessary, unplug the keyboard or mouse cable from the ADB connector on the back of your computer. Setting Up for Macintosh Users 11