Apple M3322LL/A User Guide - Page 50
Click the Geometry button., Click the Convergence button., IMPORTANT
View all Apple M3322LL/A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
2 Click the Geometry button. The Geometry window appears. Click to adjust convergence. 3 Click the Convergence button. The Convergence Control window appears and your screen background changes to show a grid of red, green, and blue signals. When convergence is set properly, the signals in the grid are aligned vertically and horizontally. IMPORTANT When you adjust convergence, refer to the grid outside the Convergence Control window, not the picture of the grid inside the window. Click to move the red signal to the left and the blue signal to the right. Click to move the red signal down and the blue signal up. Click to move the red signal up and the blue signal down. Click to move the red signal to the right and the blue signal to the left. 36 Chapter 3