Brother International Laura Ashley Innov-ís NX2000 Users Manual - English - Page 11
Names Of Machine Parts And Their Functions
View all Brother International Laura Ashley Innov-ís NX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Machine ■ Front View ■ Right-side/Rear View a Top cover Open the top cover to thread the machine and wind the bobbin. b Thread guide plate Pass the thread around the thread guide plate when threading the upper thread. c Thread take-up lever check window Look through the window to check the position of the take-up lever. d Needle threader lever Use the needle threader lever when threading the needle automatically. e Thread cutter Pass the threads through the thread cutter to cut them. f Flat bed attachment with accessory compartment Store presser feet and bobbins in the accessory compartment of the flat bed attachment. Remove the flat bed attachment when sewing cylindrical pieces such as sleeve cuffs. g Operation buttons (5 buttons) and sewing speed controller Use these buttons to perform various operations, such as starting sewing and raising or lowering the needle. Slide the sewing speed controller to adjust the sewing speed while using utility stitches. h Knee lifter slot Insert the knee lifter into the slot. i Knee lifter Use the knee lifter to raise and lower the presser foot. j LCD (liquid crystal display) Stitch settings can be viewed and edited, and operations for using the machine can be displayed, and error messages appear in the LCD. k Spool pin Place a spool of thread on the spool pin. l Spool cap Use the spool cap to hold the spool in place. m Bobbin winder Use the bobbin winder when winding the bobbin. n Supplemental spool pin Use this spool pin to wind the bobbin thread while sewing or to sew with the twin needle. o Thread guide Pass the thread through this thread guide when winding the bobbin thread. p Bobbin winding thread guide Pass the thread around this thread guide when winding the bobbin thread. a Handle When transporting the machine, carry it by this handle. b Handwheel Turn the handwheel toward you to sew one stitch or to raise or lower the needle. c USB connector Plug in a USB cable to connect a computer. d Touch pen holder Use the touch pen holder to hold the touch pen when it is not being used. e Foot controller jack Insert the plug on the end of the foot controller cord into the foot controller jack. f Foot controller Press the foot controller to control the speed of the machine. g Jack connector Insert the power cord into the jack connector. h Main power switch Use the main power switch to turn the machine ON and OFF. i Air vent Do not cover the air vent while the sewing machine is being used. j Feed dog position indicator Indicates whether the feed dogs are raised or lowered. k Presser foot lever Raise and lower the presser foot lever to raise and lower the presser foot. 9