Brother International Laura Ashley Innov-ís NX2000 Users Manual - English - Page 151
Upgrading Your Machine's Software
View all Brother International Laura Ashley Innov-ís NX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
UPGRADING YOUR MACHINE'S SOFTWARE UPGRADING YOUR MACHINE'S SOFTWARE You can use a computer to download software upgrades for your sewing machine. When an upgrade program is available on "http://solutions.brother.com", please download the files following the instructions on the web site and steps below. Note There are two upgrade files. Be sure to download both files successively. Memo • When the machine's software is upgraded, saved combinations of character and decorative stitches are erased. • While the software is being upgraded, the buzzer will not sound when a key is pressed. a While holding the "Presser Foot Lifter" button pressed, turn on the machine. → The following screen appears. d When the screen shown in step a appears again, press . → The message "Saving the upgrade file. Do not turn main power to OFF."appears. The download takes about 3 minutes. Press LOAD after saving the upgrade file in the machine. e When the following screen appears, the first upgrade file is downloaded. Press LOAD after saving the upgrade file in the machine. 6 Appendix b Plug the USB cable connectors into the corresponding USB ports on the computer and on the machine. → The "Removable Disk" icon appears in "My Computer" on the computer. c Copy the upgrade file to "Removable Disk". f Copy the second upgrade file to "Removable Disk". g When the screen shown in step a appears again, press . → The message "Saving the upgrade file. Do not turn main power to OFF."appears. The download takes about 3 minutes. → The message "Connected to PC. Do not disconnect the USB cable." appears. 149