Brother International Laura Ashley Innov-ís NX2000 Users Manual - English - Page 110

EDITING STITCH PATTERNS EDITING STITCH PATTERNS Using the editing functions, you can change the patterns in a variety of ways, such as resizing them or flipping them to create a mirror image. Memo Depending on the pattern that is selected, some editing functions may not be available. a b f e c d j k ■ Key Functions No. Key Name a Screen lock key b Image check key g n h o i m l Function Press this key to lock the screen. When the screen is locked, the various settings, such as the stitch width and stitch length, are locked and cannot be changed. Press this key again to unlock the settings. Press this key to check an image of the selected patterns (characters). Page 47 103, 104 c Automatic Press this key to select the automatic reinforcement stitching setting. If you select 43 reinforcement stitch key this setting before sewing, the machine will automatically sew reinforcement stitches at the beginning and end of stitching. Press this key again to cancel the setting. d Automatic thread Press this key to select the automatic thread cutting setting. If you select this 44 cutting key setting before sewing, the machine will automatically cut the thread at the end of stitching. Press this key again to cancel the setting. e Horizontal mirror image Press this key to create a horizontal mirror image of the selected stitch pattern. 109 key f Vertical mirror image Press this key to create a vertical mirror image of the selected stitch pattern. 109 key g Needle mode selection Press this key to select the setting for twin needle sewing. Each time this key is 30 key (single/twin) pressed, the setting switches between that for single needle sewing and for twin needle sewing. h Elongation key If a 7 mm satin stitch pattern is selected, press this key to select from five settings 109 for changing the pattern length without changing the zigzag width or stitch length. i Single/repeat sewing Press this key to switch between sewing the pattern a single time or repeatedly. 110 key j Stitch settings key Press this key to open the screen for changing the stitch width, stitch length and 42 thread tension for the selected pattern. Normally, the machine has default settings. k Back to beginning key When sewing is stopped, press this key to return to the beginning of the pattern. 111 l Delete key If the wrong pattern was accidentally selected, press this key to erase it. If patterns 103, 104 have been combined, each press of this key erases the last pattern in the combination. m Memory key Press this key to save the pattern combination. 119 n o 108 Size key Press this key after selecting a pattern to change the size of the pattern (large or 109 small). Thread density key Press this key after selecting a pattern to change the stitching density of the 110 pattern.