Brother International Laura Ashley Innov-ís NX2000 Users Manual - English - Page 147
Error Messages
View all Brother International Laura Ashley Innov-ís NX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
ERROR MESSAGES ERROR MESSAGES If the "Start/Stop button" or the "Reverse/Reinforcement Stitch" button is pressed before the machine is correctly set up or if an incorrect operation is performed, the machine stops and informs you of the error with an alarm and an error message. If an error message appears, correct the problem according to the instructions in the message. (The message that is displayed can be cancelled either by pressing or performing the operation correctly.) This message is displayed if a malfunction occurred. This message is displayed when you try to use the needle threader lever while twin needle sewing is set. This message is displayed when the upper thread is broken or not threaded correctly, and the "Start/ Stop" button or the "Reverse/ Reinforcement Stitch" button is pressed. CAUTION • Be sure to rethread the machine. If you press the "Start/Stop" button without rethreading the machine, the thread tension may be wrong or the needle may break and cause injury. This message is displayed when using USB cable to download information from PC to machine. This message is displayed when a buttonhole stitch is selected and the "Start/Stop" button or the "Reverse/Reinforcement Stitch" button is pressed while the buttonhole lever is raised. This message is displayed when the "Start/Stop" button, "Reverse/ Reinforcement Stitch" button, "Thread Cutter" button or "Presser 6 Foot Lifter" button is pressed while the presser foot lever is raised/the needle is lowered. Appendix This message is displayed when the memory is full and the stitch or pattern cannot be saved. 145