Brother International Laura Ashley Innov-ís NX2000 Users Manual - English - Page 27
Winding the Bobbin Using the Spool Pin
View all Brother International Laura Ashley Innov-ís NX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
■ Winding the Bobbin Using the Spool Pin The main spool pin cannot be used to wind the bobbin while sewing. For details, see "Using the Supplemental Spool Pin" on page 23. 2 7 8 3 LOWER/UPPER THREADING e Slide the spool cap as far as possible onto the spool pin, and then return the spool pin to its original position. f While holding the thread from the spool with both hands, pull the thread through the lower notch in the thread guide plate, then through 1 the upper notch. Getting Ready 6 54 9 b a o l 1 a Turn on the machine. b Open the top cover. c Align the groove in the bobbin with the spring on the bobbin winder shaft, and then slide the bobbin onto the shaft. a b a Groove in bobbin b Spring on bobbin winder shaft d Pivot the spool pin so that it angles upward, and then place the spool of thread on the spool pin. * Make sure that the thread unwinds from the front. c a b a Lower notch in the thread guide plate b Upper notch in the thread guide plate g Pass the thread through the thread guide. a a Thread guide h Pass the thread under the pin on the bobbin winding thread guide, and then pass it around the pretension disk. * Make sure that the thread passes under the pretension disk. a b a Pin b Pretension disk i Follow steps g through j on page 24. a Spool cap b Thread spool c Spool pin 25