Brother International Laura Ashley Innov-ís NX2000 Users Manual - English - Page 53
Selecting a Stitch, Saving Stitch Settings
View all Brother International Laura Ashley Innov-ís NX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
SELECTING A UTILITY STITCH Selecting a Stitch Saving Stitch Settings a Turn on the machine, and then lightly press the display. → Depending on the setting, either "Q-01 Piecing stitch (Middle)", "1-01 Straight stitch (Left)" or "1-03 Straight stitch (Middle)" is automatically selected. b Press to display a screen of the stitches in the selected category, and then select a stitch. This machine is preset with the default settings for the stitch width (zigzag width), stitch length, thread tension, automatic thread cutting, automatic reverse/ reinforcement stitching, etc. However, if you wish to save specific settings for a stitch so that they can be used later, press after changing the settings to save the new settings with the selected stitch. Example: Using a stitch length of 2.0 mm for the straight stitch a Press , and then select a straight stitch. Memo 3 The default stitch length is 2.5 mm. b Set the stitch length to 2.0 mm. Utility Stitches → An image of the selected stitch is displayed below the symbol of the appropriate presser foot. Memo For details on the stitches, refer to "STITCH SETTING CHART" at the end of this manual. ■ Using the Mirror Image Key Press so that it appears as . A mirror image of the selected stitch is created. Note If appears as after a stitch (buttonholes, multi-directional sewing patterns, etc.) is selected, a mirror image of the selected stitch cannot be created. c Press . * To reset the selected stitch to its default settings, press , and then press . 51