Brother International Laura Ashley Innov-ís NX2000 Users Manual - English - Page 80
Presser Foot
View all Brother International Laura Ashley Innov-ís NX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
SEWING THE STITCHES a Press to lower the feed dogs and to set the machine to free-motion sewing mode. f Tighten the screw. g Using the measurement on the quilting foot as a guide, sew around the motif. b Select a straight stitch with the middle (center) needle position or . c Follow the steps on page 32 "Removing the Presser Foot" to remove the presser foot. d Loosen the presser foot holder screw, and then remove the screw and the presser foot holder. e Position the free-motion echo quilting foot "E" on the left side of the presser bar with the holes in the quilting foot and presser bar aligned. a 6.4 mm (approx. 1/4 inch) Finished project h Press mode. to cancel the free-motion sewing 78
SEWING THE STITCHES
78
a
Press
to lower the feed dogs and to set
the machine to free-motion sewing mode.
b
Select a straight stitch with the middle
(center) needle position
or
.
c
Follow the steps on page 32 “Removing the
Presser Foot”
to remove the presser foot.
d
Loosen the presser foot holder screw, and
then remove the screw and the presser foot
holder.
e
Position the free-motion echo quilting foot
“E” on the left side of the presser bar with the
holes in the quilting foot and presser bar
aligned.
f
Tighten the screw.
g
Using the measurement on the quilting foot as
a guide, sew around the motif.
a
6.4 mm (approx. 1/4 inch)
Finished project
h
Press
to cancel the free-motion sewing
mode.