Brother International Laura Ashley Innov-ís NX2000 Users Manual - English - Page 33
needle bar thread guide
View all Brother International Laura Ashley Innov-ís NX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
LOWER/UPPER THREADING g While holding the thread from the spool with both hands, pull the thread through the lower k Press to select the setting for twin needle sewing. notch in the thread guide plate, then through the upper notch. Hold the end of the thread * The stitch width becomes narrower than with single needle sewing. with your left hand, and then guide the thread a through the groove, following the arrows in the illustration. 1 Getting Ready a a Single needle/twin needle setting → appears. a Shutter h Without passing the thread through the needle bar thread guide, manually thread the needle on the right side. a a Needle bar thread guide Note The needle threader cannot be used. Manually pass the thread through the eye of the needle from the front. If the needle threader is used, damage to the machine may result. i Press screen. , or press in the CAUTION • Be sure to set the twin needle mode when using the twin needle. Using the twin needle while the machine is in single needle mode could cause the needle to break, resulting in damage. l Press the "Start/Stop" button after lowering the presser foot lever. Memo To change the sewing direction with the twin needle, raise the needle from the fabric, raise the presser foot lever, and then turn the fabric. j Select a stitch. Note If appears as after a stitch is selected, the twin needle cannot be used with the selected stitch. 31