Brother International Laura Ashley Innov-ís NX2000 Users Manual - English - Page 29
Upper Threading
View all Brother International Laura Ashley Innov-ís NX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
LOWER/UPPER THREADING b Guide the bobbin thread through the groove, following the arrow in the illustration. Upper Threading Note • Do not cut the thread with the cutter. • Do not attach the bobbin cover. This section describes how to thread the machine and the needle. The machine is marked with numbers that indicate the threading order. 1 Getting Ready c While lightly holding the upper thread, press the "Needle Position" button twice to lower, then raise the needle. d Gently pull the upper thread to pull up the bobbin thread. → A loop of the bobbin thread comes out from the hole in the needle plate. CAUTION • Be sure to thread the machine properly. Improper threading can cause the thread to tangle and break the needle, leading to injury. • When using accessories not included with this machine, attach the accessory to the machine after threading the machine. 8 12,13 11 10 9 14,15 7 4, 5 6 3 2,16 1 a Turn on the machine. b Press the "Presser Foot Lifter" button to raise the presser foot. → The upper thread shutter opens so the machine can be threaded. a e Pull out about 100 mm of the bobbin thread, and then pass it under the presser foot toward the rear of the machine, making it even with the upper thread. a b a Upper thread b Bobbin thread f Attach the bobbin cover. a Upper thread shutter Memo This machine is equipped with an upper thread shutter, allowing you to check that the upper threading is performed correctly. 27