Brother International MFC 6490CW Users Manual - English - Page 118
Using a scanned paper document as your watermark, Setting your changes as the new default
UPC - 012502620549
View all Brother International MFC 6490CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Chapter 11 Using a scanned paper document as your watermark 11 a Press (Copy). b Enter the number of copies you want. c Press a or b to choose Watermark Copy. Press OK. d Press d or c to choose On. e Press a or b to choose Current Setting. Press OK. f Press a or b to choose Scan. Press OK. Then place the page that you want to use for the watermark on the scanner glass. g Press Black Start or Color Start. h Take out the watermark document you scanned and load the document you want to copy. i Press d or c to change the Transparency of the watermark. Press OK. j Press Black Start or Color Start. Note You cannot enlarge or reduce the scanned watermark. Setting your changes as the new default 11 You can save the copy settings for Quality, Enlarge/Reduce, Tray Select (MFC6490CW only), Brightness, Contrast, Page Layout or Skew Adjustment (MFC-6490CW only) that you use most often by setting them the default settings. These settings will stay until you change them again. a Press (Copy). b Press a or b to choose your new setting. Press OK. Repeat this step for each setting you want to change. c After changing the last setting, press a or b to choose Set New Default. Press OK. d Press 1 to choose Yes. e Press Stop/Exit. Restoring all settings to the factory settings 11 You can restore all the settings you have changed to the factory settings. These settings will stay until you change them again. a Press (Copy). b Press a or b to choose Factory Reset. Press OK. c Press 1 to choose Yes. d Press Stop/Exit. 102