Brother International MFC 6490CW Users Manual - English - Page 167
PhotoCapture Center, Difficulties, Network Difficulties - usb port
UPC - 012502620549
View all Brother International MFC 6490CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Troubleshooting and Routine Maintenance PhotoCapture Center® Difficulties Difficulty Suggestions B Removable Disk does not work properly. 1 Have you installed the Windows® 2000 update? If not, do the following: 1) Unplug the USB cable. 2) Install the Windows® 2000 update using one of the following methods. Install MFL-Pro Suite from the CD-ROM. (See the Quick Setup Guide.) Download the latest service pack from the Microsoft Web site. 3) Wait about 1 minute after you restart the PC, and then connect the USB cable. 2 Take out the memory card or USB Flash memory drive and put it back in again. 3 If you have tried 'Eject' from within Windows®, take out the memory card or USB Flash memory drive before you continue. 4 If an error message appears when you try to eject the memory card or USB Flash memory drive, it means the card is being accessed. Wait a while and then try again. 5 If all of the above do not work, turn off your PC and machine, and then turn them on again. (You will have to unplug the power cord of the machine to turn it off.) Cannot access Removable Disk from Desktop icon. Make sure that you have correctly inserted the memory card or USB Flash memory drive. Part of my photo is missing when Make sure that Borderless Printing and Cropping are turned off. (See Borderless printed. printing on page 120 and Cropping on page 120.) Network Difficulties Difficulty Cannot print over the Network. The network scanning feature does not work. The network PC-Fax Receive feature does not work. Your computer cannot find your machine. Suggestions Make sure that your machine is powered on and is online and in Ready mode. Print a Network Configuration list (see Reports on page 90.) and check the current Network settings printed in this list. Reconnect the LAN cable to the hub to verify that the cabling and network connections are good. If possible, try connecting the machine to a different port on your hub using a different cable. If the connections are good, the machine shows LAN Active for 2 seconds. (If you are using a wireless connection or are having Network problems, see the Network User's Guide for more information.) (For Windows® users only) Firewall settings on your PC may be rejecting the necessary network connection. Follow the instructions below to configure the Firewall. If you are using a personal Firewall software, see the User's Guide for your software or contact the software manufacturer. For Windows® XP SP2 and Windows Vista® users, see Firewall settings in the Software User's Guide on the CD-ROM. For Windows® XP SP1 user's, please visit the Brother Solutions Center. (http://solutions.brother.com) Firewall settings on you PC may be rejecting the necessary network connection. For detail, see the instruction above. Re-select your machine in the Device Selector application located in Macintosh HD/Library/Printers/Brother/Utilities/DeviceSelector or from the model list in ControlCenter2. 151