Brother International MFC 6490CW Users Manual - English - Page 63

Sending a Fax Setting your changes as the new default 5 You can save the fax settings for Fax Resolution, Contrast, Glass ScanSize and Real Time TX you use most often by setting them as default. These settings will stay until you change them again. a Press (Fax). b Press a or b to choose the menu setting you want to change, and then press d or c to choose the new option. Press OK. Repeat this step for each setting you want to change. c After changing the last setting, press a or b to choose Set New Default. Press OK. d Press 1 to choose Yes. e Press Stop/Exit. Restoring all settings to the factory settings 5 You can restore all the settings you have changed to the factory settings. These settings will stay until you change them again. a Press (Fax). b Press a or b to choose Factory Reset. Press OK. c Press 1 to choose Yes. d Press Stop/Exit. Sending a fax manually 5 Manual transmission lets you hear the dialing, ringing and fax-receiving tones while sending a fax. a Press (Fax). b Load your document. c To listen for a dial tone press Hook or pick up the handset of an external telephone. d Dial the fax number. 5 e When you hear the fax tone, press Black Start or Color Start. If you are using the scanner glass press 1 to send a fax. f If you picked up the handset of an external telephone, replace it. Sending a fax at the end of a conversation 5 At the end of a conversation you can send a fax to the other party before you both hang up. a Ask the other party to wait for fax tones (beeps) and then to press the Start or Send key before hanging up. b Press (Fax). c Load your document. d Press Black Start or Color Start. „ If you are using the scanner glass, press 1 to send a fax. e Replace the handset of the external phone. 47