Brother International MFC-J4710DW Software Users Manual - English - Page 209
Network Scanning, Before using Network Scanning, Network license (Windows®)
View all Brother International MFC-J4710DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
13 Network Scanning 13 To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can set or change the address settings from the control panel (See Network User's Guide: Control panel setup.) or by using the BRAdmin Light software. If you installed the machine following the instructions for a network user in the Quick Setup Guide then the machine should already be configured for your network. NOTE • For network scanning, a maximum of 25 clients can be connected to one machine on a network. For example, if 30 clients try to connect at once, 5 of those clients will not be shown on the LCD, or connected. • (Windows®) If your computer is protected by a firewall, and is unable to network scan, you may need to configure the firewall settings. If you are using Windows® Firewall and you installed MFL-Pro Suite from the CD-ROM, the necessary Firewall settings have already been made. For more information, see Firewall settings (For Network users) on page 116. Before using Network Scanning 13 Network license (Windows®) 13 This product includes a computer license for up to 2 users. This license supports the installation of the MFL-Pro Suite software including Nuance™ PaperPort™ 12SE on up to 2 PCs on the network. If you want to use more than 2 PCs with Nuance™ PaperPort™ 12SE installed, please buy the Brother NL-5 pack which is a multiple computer license agreement pack for up to 5 additional users. To buy the NL-5 pack, contact your Brother dealer. NOTE Depending on your model Nuance™ PaperPort™ 12SE may not be included. If it is not included, please use other software applications that support scanning. 13 Configuring Network Scanning for Windows® 13 If you are using a different machine than the one that was originally registered to your computer during the installation of MFL-Pro Suite software, follow the steps below. a (Windows® XP) Click the Start button, Control Panel, Printers and Other Hardware, then Scanners and Cameras (or Control Panel, Scanners and Cameras). (Windows Vista®) Click the button, Control Panel, Hardware and Sound, then Scanners and Cameras. (Windows® 7) 201