Canon EOS C500 Instruction Manual - Page 110
Pre-recording Mode, Select [Pre Rec] and then press SET.
View all Canon EOS C500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Special Recording Modes 110 Pre-recording Mode When pre-recording mode is activated, the camera starts recording continuously into a temporary memory of approximately 3 seconds so when you press the START/STOP button, the clip will contain also approximately 3 seconds of video and audio recorded before you pressed the button. Operating modes: [ 4K/2K/MXF Setup] [Special Rec] [Off] 1 Set the system priority to MXF (A 64). 2 Open the [Special Rec] submenu. [ 4K/2K/MXF Setup] > [Special Rec] 3 Select [Pre Rec] and then press SET. • [PRE REC STBY] appears at the top of the screen. 4 Press the START/STOP button to begin recording. • The tally lamp illuminates. • [PRE REC STBY] changes to [Ü PRE REC] while recording. 5 Press the START/STOP button again to stop recording. • The camera records the clip, including approximately 3 seconds of video and audio recorded before the START/STOP button was pressed. • The tally lamp goes out and [PRE REC STBY] appears at the top of the screen. NOTES • You can use only one special recording mode at a time. • Pre-recording mode will be deactivated if the special recording mode is changed or turned off. It will be deactivated also if you change the video configuration. • During pre-recording mode, the time code will be recorded with the running mode (A 84) set to [Free Run], regardless of the previous setting. Alternatively, you can use an external time code signal. When the time code is recorded, it will include the 3 seconds before the START/STOP button was pressed. When special recording mode is deactivated, the running mode will return to its previous setting.