Canon EOS C500 Instruction Manual - Page 64

Video Configuration: Type of Recording, Resolution and Frame Rate NOTES • If you set an assignable button to [Resize MXF Output] (A 111), you can press the button to switch the resizing method. 64 • During 4K and 2K modes, the picture output from the 3G-SDI terminals and the picture recorded on a CF card will differ in image quality due to differences in the signal processing algorithm. • Because the camera uses a simple resize conversion process vertically, diagonal lines may appear jagged. Selecting the Video Configuration for MXF Mode To set the video configuration, select the system frequency, system priority, bit rate and resolution, and frame rate, as necessary. For a summary of the video configuration, refer to the table following the procedures below. Operating modes: Selecting the System Priority 1 Open the [System Priority] submenu. [ 4K/2K/MXF Setup] > [System Priority] 2 Select [MXF] and then press SET. • The camera will restart in MXF mode. [ 4K/2K/MXF Setup] [System Priority] [4K] Selecting the System Frequency 1 Open the [System Frequency] submenu. [ 4K/2K/MXF Setup] > [System Frequency] 2 Select a desired option and then press SET. • The camera will restart in the selected mode. Selecting the Bit Rate and Resolution 1 Open the [Bit Rate/Resolution] submenu to set the bit rate and resolution. [ 4K/2K/MXF Setup] > [MXF] > [Bit Rate/Resolution] 2 Select the desired option and then press SET. • The selected bit rate and resolution will appear on the upper right of the screen. [ 4K/2K/MXF Setup] [System Frequency] [59.94 Hz] or [50.00 Hz]* * Depending on the country/region of purchase. [ 4K/2K/MXF Setup] [MXF] [Bit Rate/Resolution] [50 Mbps 1920x1080]