Canon EOS C500 Instruction Manual - Page 122
Other Functions], options are [On] and [Off]. Default: [Off]
View all Canon EOS C500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Custom Picture Settings [Phase]: Adjusts the amount of correction to the color phase. This setting can be adjusted from -18 to 18. (Default: ±0) 122 [Other Functions] [Setup Level]: Adjusts the black level set by the [Black] and [Master Pedestal] settings. [Level]: Determines the amount of adjustment to be made. This setting can be adjusted from -50 to 50. (Default: ±0) [Press]: Compresses the dynamic range of the video signal so that it does not exceed 100%. Available options are [On] and [Off]. (Default: [Off]) [Clip At 100%]: When the video signal exceeds 100%, this function clips the white level at 100%. Available options are [On] and [Off]. (Default: [Off]) NOTES • When an optional RC-V100 Remote Controller is connected to the camera, the following custom picture settings can be changed using the buttons and dials on the remote controller. They cannot be changed from the camera while the RC-V100 is connected. If necessary, use the buttons and dials on the remote controller to adjust them. - [Black] > [Master Pedestal]; [Black] > [Master Black] > [Red], [Blue] - [Black Gamma] > [Level] - [Knee] > [Slope] and [Point] (only when [Knee] > [Enable] is set to [On]) - [Sharpness] > [Level] - [White Balance] > [R Gain], [B Gain]