Canon EOS C500 Instruction Manual - Page 52
During 4K and 2K modes, During MXF mode, Select [4K], [2K] or [MXF] and then press SET.
View all Canon EOS C500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Recording Video 3 Select [4K], [2K] or [MXF] and then press SET. • The system priority changes to the selected menu item. Hereafter, [ 4K/2K/MXF Setup] each mode will be referred to in this manual as "4K mode", "2K mode" and "MXF mode", respectively. 52 • Select [4K] or [2K] to record a 4K or 2K clip* on an external recorder. Select [MXF] to record only an MXF clip (HD video) on a CF card. • During 4K mode, [RAW] appears on the upper right of the screen and [System Priority] [4K] the icon appears on the rear panel. * "Clip" refers to one movie unit from the point you press the START/STOP button to start recording until you press again to pause the recording. You can also include custom picture settings (A 114) and metadata (A 97) with MXF clips. 4 Press the START/STOP button to begin recording. • During 4K and 2K modes: - Recording starts and a signal is sent to an external recorder connected to the HD/SD SDI or 3G-SDI terminals instructing it to start recording. [ÜREC `] appears at the upper center of the screen and the tally lamp illuminates. - If there is a CF card in a CF card slot, the camera simultaneously records an MXF clip on the card. In such case, [ÜREC] appears on the upper left of the screen. - Depending on the aspect ratio of the 4K or 2K video, you can select the resizing method when recordings on the CF card are output (A 63). • During MXF mode: - Recording starts. The tally lamp illuminates and [ÜREC] appears on the upper center of the screen. - If an external recorder is connected to the HD/SD SDI terminal, a signal is sent instructing it to start recording. [ÜREC`] appears on the center right of the screen. • You can use the START/STOP button on the back of the camera, the front of the camera (next to the lens mount), or the monitor unit. 5 Press the START/STOP button to pause the recording. • Recording stops and a signal is sent to the external recorder to pause the recording. When recording on a CF card, a clip is recorded and the camera enters record pause mode. [STBY`] or [STBY] appears at the top of the screen. The tally lamp will also go out.