Canon EOS C500 Instruction Manual - Page 96
Monitoring the Audio with Headphones, Open the [Channel] submenu.
View all Canon EOS C500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Recording Audio Activating the Microphone's Attenuator If the audio level is too high and the sound sounds distorted, activate the microphone attenuator (20 dB). 96 1 Open the [MIC Att.] submenu. [¡ Audio Setup] > [Audio Input] > [MIC Att.] 2 Select [On] and then press SET. [¡ Audio Setup] [Audio Input] [MIC Att.] [Off] Monitoring the Audio with Headphones Connect headphones* to the × (headphone) terminal to monitor the recorded audio. You can adjust the headphone volume with the [¡ Audio Setup] > [Audio Output] > [Headphone Volume] setting. * For 50.00 Hz recordings, use commercially available headphones with a cable no longer than 3 m. Selecting the Audio Channel You can select the audio channel that is output from the × (headphone) terminal. Operating modes: 1 Open the [Channel] submenu. [¡ Audio Setup] > [Audio Output] > [Channel] 2 Select the desired option and then press SET. Options [CH1/CH2]: [CH1/CH1]: [CH2/CH2]: [All/All]: Audio from CH1 is output from the left audio channel and audio from CH2 is output from the right audio channel. Audio from CH1 is output from both the left and right audio channels. Audio from CH2 is output from both the left and right audio channels. Audio from CH1 and CH2 is mixed and output from both the left and right audio channels. × (headphone) terminal [¡ Audio Setup] [Audio Output] [Channel] [CH1/CH2] NOTES • If you set an assignable button to [Audio Output CH] (A 111), you can press the button to change the audio channel directly.