Canon EOS C500 Instruction Manual - Page 149
Using the HD/SD SDI Terminal, 4K/2K/MXF Setup], Output]
View all Canon EOS C500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Connecting to an External Monitor 2 Select [MON. 2] and then press SET. • The video output from the MON. 2 terminal will be ACESproxy10-compliant. • Because this setting takes priority, the [ 4K/2K/MXF] > [MON. 1 & 2] > [LUT] setting will not be available. 149 Using the HD/SD SDI Terminal The digital signal output from the HD/SD SDI terminal includes the video signal, audio signal and time code signal. If necessary, perform the following procedure to change the output to HD or SD*. Turning the output off will conserve the camera's power. * Not available for 24.00 Hz recordings. Operating modes: [ 4K/2K/MXF Setup] [HD/SD SDI] [Output] [HD] 1 Open the [Output] submenu. [ 4K/2K/MXF Setup] (in mode) or [¢ Video Setup] (in mode) > [HD/SD SDI] > [Output] 2 Select the desired option and then press SET. • If you selected [SD], you can select the SD resizing method (A 150). • If necessary, adjust the scan mode and resizing method with the [ 4K/2K/MXF Setup] > [HD/SD SDI] > [Scan Mode] and [ 4K/2K/MXF Setup] > [Resize MXF Output] settings. Depending on the video configuration, the scan mode may be set automatically. • If necessary, you can superimpose the onscreen displays on the video displayed on the external monitor (A 151). NOTES • When you output from the HD/SD SDI terminal video in HD that was shot with Canon Log gamma, you can apply a LUT (A 148). Using the HDMI OUT Terminal The HDMITM OUT terminal also offers a digital connection and outputs both a video and audio signal. The output signal will automatically switch to HD or SD* depending on the capability of the external monitor. You can select the resizing method (A 63) when the camera outputs HD video during 4K or 2K mode. * Not available for 24.00 Hz recordings. NOTES • Correct operation cannot be guaranteed when connecting the camera to DVI monitors. • Video may not be output correctly depending on the monitor. In such case, use another terminal. • The HDMI OUT terminal is output only. Do not connect the camera to another device's output terminal using the HDMI OUT terminal as this will cause a malfunction. • If necessary, you can superimpose the onscreen displays on the video displayed on the external monitor (A 151). • You can select the SD resizing method (A 150).