Cisco PVC300 Administration Guide - Page 11
Hardware Reset, Camera Usage Notes - internet camera
UPC - 745883584505
View all Cisco PVC300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Getting to Know the PVC300 PTZ Internet Camera Camera Usage Notes 1 Hardware Reset There is an indented reset button on the back panel of the PVC300 PTZ Internet Camera. It is used to reboot the PVC300 PTZ Internet Camera or restore it to the factory default. Sometimes rebooting the PVC300 PTZ Internet Camera can set it back to normal state. If the problems remain after rebooting, restore the factory default and install again. Reboot-Press and release the indented reset button with a paper clip. Wait for the PVC300 PTZ Internet Camera to reboot. Restore-Press the indented reset button continuously for around 30 seconds until the status LED rapidly blinks amber and green simultaneously. Note that all settings will be restored to factory default. Camera Usage Notes The use of surveillance devices may be prohibited by law in your country. It is your responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use. It is important to first verify that all contents received are complete as listed in the Quick Start Guide. Carefully read and follow the instructions in Chapter 2, "Installing The Camera," to avoid damages due to faulty assembly and installation. This also ensures the product is used properly as intended. Cisco Small Business Administration Guide for the Model PVC300 PTZ Internet Camera with Audio and PoE 11