Cisco PVC300 Administration Guide - Page 48

Using the Setup Screen Configuring Audio, Video, and Camera Controls 6 your computer is played through your camera's speakers. You can then use the icon to turn the camera's external speakers on and off. • In Two-Way Audio mode, both the Listen Only and Talk Only icons appear on the Home page. With Two-Way audio, you can use the Talk Only icon in one of two ways: Toggle or Push. To use Toggle, if you want to talk, click the Talk Only icon. Click it again when you are done. To use Push, if you want to talk, hold down the Talk Only icon. When done, let go of the icon. Note that enabling Talk disables Listen, and disabling Talk enables Listen. AAC Bit Rate-Select the bit rate for the AAC codec. This codec produces good sound quality at the cost of higher bandwidth consumption. The supported bit rates are: 16 Kbps, 32 Kbps, 48 Kbps, 64 Kbps, 96 Kbps and128 Kbps. GSM-ARM bit rate-Select the bit rate for the GSM-ARM codec. This codec optimizes speech quality and requires less bandwidth. The supported bit rates are: 4.75 Kbps, 5.15 Kbps, 5.90 Kbps, 6.7 Kbps, 7.4 Kbps, 7.95 Kbps, 10.2 Kbps and 12.2 Kbps. Cisco Small Business Administration Guide for the Model PVC300 PTZ Internet Camera with Audio and PoE 48