Cisco PVC300 Administration Guide - Page 47

Using the Setup Screen Configuring Audio, Video, and Camera Controls 6 Overlay title and time stamp on video-Select this option to place the video title and time on video streams. Note that when the frame size is set to 176 x 144, only time will be stamped on video streams. If this feature is not selected, only one image at any one time is retained because all images are contained in one folder. When you are satisfied with the image, press Save to set the image settings. Click Restore to recall the original settings without incorporating the changes. Setting Camera Audio Functions This Folder has only one section, Audio Settings. This tab is used to set up the Internet Camera audio functions. Disable Audio Checkbox-Select this option to disable audio transmission from the PVC300 PTZ Internet Camera to all clients. Note that if mute mode is turned on, no audio data will be transmitted to all clients even though the audio transmission is enabled in the Client Settings page. Internal Microphone Gain-Select the gain of the internal audio input according to ambient conditions. Adjust the gain in thirty three steps from +12 db (most sensitive) ~ -34.5 db (least sensitive). External Microphone Gain-There are two options for external microphone input gain: 0db and 20db. Audio Source-Select either internal or external microphone. Audio type-Select an audio codec (AAC or GSM-AMR). NOTE: The PVC300 PTZ Internet Camera offers two inputs to capture audio: internal microphone or external microphone. Two Way Audio Type-Select Talk Only, Listen Only, or Two Way Audio. The first two options Talk Only and Listen Only) are not full duplex to eliminate any echoes that may be present. Both AAC and GSM-AMR bit rates are adjustable. • In Listen Only mode, your computer speakers are enabled and your camera's microphone is enabled. When you enable Listen Only, an icon is displayed on the Home page and audio is picked up through the camera. You can then use the icon to turn audio on and off. • In Talk Only mode, the camera's external speakers are enabled. When you enable Talk Only, an icon is displayed on the Home page and audio from Cisco Small Business Administration Guide for the Model PVC300 PTZ Internet Camera with Audio and PoE 47