Cisco PVC300 Administration Guide - Page 54

Using the Setup Screen Configuring Camera Applications 6 option to enable passive mode FTP and allow data transmission to pass through the firewall. To verify if the FTP settings are correctly configured, click Test. The result will be shown in a pop-up window. If it works, you will also receive a test.txt file on the FTP server. HTTP-Select to send the media to a HTTP server when a trigger is activated. • URL-Enter the URL of the HTTP server. • User name-Enter the user name. • Password-Enter the password. To verify if the HTTP settings are correctly configured, click Test. The result will be shown in a pop-up window. If it works, you will also receive a test.txt file on the HTTP server. Network storage-Select to send the media to a network storage when a trigger is activated. • Network storage location-Enter the path of the network storage. • Workgroup-Enter the workgroup for network storage. • User name-Enter the user name. • Password-Enter the password. To verify if the network storage settings are correctly configured, click Test. The result will be shown in a pop-up window. If it works, you will also receive a test.txt file on the network storage server. When completed, click Save to take effect and then click Close to quit this page. The new server name appears in the server drop-down list on the application page as below. To remove a server setting from the list, select a server name from the drop-down list and then click Delete. NOTE You can only delete an event setting when the setting is not active. Cisco Small Business Administration Guide for the Model PVC300 PTZ Internet Camera with Audio and PoE 54