Dell PowerConnect 8024 User's Guide - Page 111

• End Day - Select the ending day number. This field displays only when the Recurring check box is selected. • End Month - Select the ending month. • End Time - Select the ending time in hh:mm format. • End Date - Select the ending date. This field displays only when the Recurring check box is cleared. • End Year. - Select the ending year. This field displays only when the Recurring check box is cleared. • Offset - Set the number of minutes to add during summer time in the range 0 to 1440. • Zone - Set the acronym of the time zone to be displayed when summer time is in effect. Defining the Summer Time Parameters 1. Open the Summer Time Configuration page. 2. Define the fields as needed. 3. Click Apply Changes. The summer time settings are modified, and the device is updated. Configuring Summer Time Parameters Using CLI Commands For information about the CLI commands that perform this function, see the Clock Commands chapter in the CLI Reference Guide. The following table summarizes the equivalent CLI commands you use to configure summer time parameters. Table 6-6. Summer Time Parameters Commands CLI Command clock summer-time recurring clock summer-time date no clock summer-time Description Sets the summertime offset to UTC recursively every year. Sets the summertime offset to UTC. Resets the recurring summertime configuration. Clock Detail Use the Clock Detail page to set the time and date or view information about the current time, time zone, and summer time settings. To display the Clock Detail page, click System →General →Clock Detail in the tree view. Configuring System Information 111