Dell PowerConnect 8024 User's Guide - Page 563

Displaying the Best Routes Table Using CLI Commands For information about the CLI command that performs this function, see the following chapter in the CLI Reference Guide: • IP Routing Commands The following table summarizes the equivalent CLI commands for this feature. Table 9-32. Best Routes Table Command CLI Command show ip route preferences Description Displays detailed information about the route preferences. Route Entry Configuration Use the Router Route Entry Configuration page to add new and configure router routes. To display the page, click Routing →Router →Route Entry Configuration in the tree view. Figure 9-36. Router Route Entry Configuration The Router Route Entry Configuration page contains the following fields: • Network Address - Specify the IP route prefix for the destination from the drop-down menu. In order to create a route, a valid routing interface must exist and the next hop IP Address must be on the same network as the routing interface. Routing interfaces are created on the IP Interface Configuration page. Valid next hop IP Addresses can be viewed on the Route Table page. • Subnet Mask - Also referred to as the subnet/network mask, this indicates the portion of the IP interface address that identifies the attached network. • Protocol - This field tells which protocol created the specified route. Possible values are: Configuring Routing 563