Dell PowerConnect 8024 User's Guide - Page 82

4. Enter the command copy tftp://{tftp address}/{file name} image to copy a new system image to the switch. When the new image is downloaded, it is saved in the area allocated for the other copy of system image (image2, as given in the example). The following is an example of the information that appears: console#copy tftp://10.254.24.64/pc62xxr0v34.stk image Mode TFTP Set TFTP Server IP 10.254.24.64 TFTP Path TFTP Filename PC8024v3.1.1.0.stk Data Type Code Destination Filename image Management access will be blocked for the duration of the transfer Are you sure you want to start? (y/n) y 5. Select the image for the next boot by entering the boot system command. After this command, enter the command show version to verify that the copy indicated as a parameter in the boot system command is selected for the next boot. The following is an example of the information that appears: console#boot system image2 Activating image image2 .. console>show version Image Descriptions image1 : default image image2 : Images currently available on Flash unit image1 image2 current-active next-active 1 3.1.1.0 3.1.1.1 image1 image2 If the image for the next boot is not selected by entering the boot system command, the system boots from the currently active image (image1, as given in the example). 6. Enter the command reload. The following message displays: 82 Configuring Dell™ PowerConnect™