Dell PowerConnect 8024 User's Guide - Page 72

Optionally you may request that the system automatically retrieve an IP address from the network via DHCP (this requires that you have a DHCP server running on the network). To setup an IP address: Please enter the IP address of the device (A.B.C.D) or enter "DHCP" (without the quotes) to automatically request an IP address from the network DHCP server. 192.168.2.1 Please enter the IP subnet mask (A.B.C.D or /nn): 255.255.255.0 Step 4: Finally, set up the gateway. Please enter the IP address of the gateway from which this network is reachable 192.168.1.1 This is the configuration information that has been collected: SNMP Interface = "public"@192.168.2.1 User Account setup = admin Password Management IP address = 192.168.2.1 255.255.255.0 Gateway = 192.168.1.1 Step 5: If the information is correct, please select (Y) to save the configuration, and copy to the start-up configuration file. If the information is incorrect, select (N) to discard configuration and restart the wizard: [Y/N] y Thank you for using the Dell Easy Setup Wizard. You will now enter CLI mode. ..... console> 72 Configuring Dell™ PowerConnect™