Dell PowerConnect 8024 User's Guide - Page 338

4. Specify Interface Priority and Path Cost. 5. Click Apply Changes. The interface settings are saved, and the device is updated. Displaying the MSTP Interface Settings Table 1. Open the MSTP Settings page. 2. Click Show All. The MSTP Interface Table displays. Figure 7-48. MSTP Interface Table 3. Use the Unit drop-down menu to view the MSTP Interface Table for other units in the stack, if they exist. 4. To modify the port priority or path cost for one or more interfaces, check Edit for the desired interfaces. 5. Make the needed changes to the values in the Port Priority or Path Cost columns. 6. Click Apply Changes. The fields are modified for the selected Interfaces, and the device is updated. Defining MSTP Interfaces Using CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • Spanning Tree Commands Configuring MST Port Settings Using CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: 338 Configuring Switching Information