Dell PowerConnect 8024 User's Guide - Page 543

The UDP/Helper Relay is added to the interface and the device is updated. Configuring IP Helper Interfaces Using CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • IP Helper Commands The following table summarizes the equivalent CLI commands for this feature. Table 9-22. IP Helper Interface Commands CLI Command Description ip helper-address (interface configuration) Configures the relay of certain UDP broadcast packets received on a specific interface. IP Helper Statistics Use the IP Helper Statistics page to view UDP Relay Statistics for the switch. To display the page, click Routing →IP Helper →Statistics in the tree view. Figure 9-26. IP Helper Statistics The IP Helper Statistics page contains the following fields: • DHCP Client Messages Received - The number of valid messages received from a DHCP client. The count is only increased if IP helper is enabled globally, the ingress routing interface is up, and the packet passes a number of validity checks, such as having a TTL >1 and having valid source and destination IP addresses. Configuring Routing 543