Dell PowerConnect 8024 User's Guide - Page 130

2. Click Show All to display the Remote Log Servers Table page. Figure 6-21. Show All Log Servers 3. To remove a server, check the corresponding Remove check box. 4. Click Apply Changes. The server is removed, and the device is updated. Working with Remote Server Logs Using CLI Commands For information about the CLI commands that perform this function, see the Syslog Commands chapter in the CLI Reference Guide. The following table summarizes the equivalent CLI commands you use to work with remote server logs. Table 6-14. Remote Server Logs Commands CLI Command logging facility logging Description Use to set the facility for logging messages. Logs messages to the specified syslog server. Defining IP Addressing Use the IP Addressing page to assign management interface and default gateway IP addresses, negotiate with the Domain Name System, set a Default Domain Name, perform Host Name Mapping, and define ARP and DHCP parameters for the interfaces. To display the IP Addressing page, click System →IP Addressing in the tree view. Use this page to go to the following features: • Out of Band Interface • Domain Name Server (DNS) • Default Domain Name • Host Name Mapping • Dynamic Host Name Mapping 130 Configuring System Information