Dell PowerConnect 8024 User's Guide - Page 162

Defining Line Passwords 1. Open the Line Password page. 2. Select device access through a Console, Telnet, or Secure Telnet (SSH) session. 3. Define the Line Password field for the type of session you use to connect to the device. 4. Confirm the Line Password. 5. Click Apply Changes. The line password for the type of session is defined, and the device is updated. Assigning Line Passwords Using CLI Commands For information about the CLI commands that perform this function, see the AAA Commands chapter in the CLI Reference Guide. The following table summarizes the equivalent CLI commands you use. Table 6-28. Line Passwords Commands CLI Command password Description Specifies the password for a line (console, telnet, or SSH). Enable Password Use the Enable Password page to set a local password to control access to normal and privilege levels. To display the Enable Password page, click System →Management Security →Enable Password in the tree view. Figure 6-50. Enable Password The Enable Password page contains the following fields: 162 Configuring System Information