Dell PowerConnect 8024 User's Guide - Page 741

The MLD Global Configuration page contains the following field: • Admin Mode - Select Enable or Disable to set the MLD administrative status. The default is disable. Click Apply Changes to send the updated configuration to the router. Configuration changes take effect immediately. These changes will not be retained across a power cycle unless a save is performed. Configuring MLD Global Settings Using CLI Commands For information about the CLI command that performs this function, see the following chapter in the CLI Reference Guide: • IPv6 Routing Commands The following table summarizes the equivalent CLI commands for this feature. Table 12-23. IPv6 MLD Global Commands CLI Command ipv6 mld router Description Enables MLD in the router in global configuration mode and for a specific interface in interface configuration mode. MLD Routing Interface Configuration Use the MLD Routing Interface Configuration page to enable selected IPv6 router interfaces to discover the presence of multicast listeners, the nodes who wish to receive the multicast data packets, on its directly attached interfaces. To access this page, click IPv6 Multicast →MLD →Routing Interface → Interface Configuration in the navigation tree. Figure 12-24. MLD Routing Interface Configuration Configuring IP Multicast 741