Dell PowerConnect 8024 User's Guide - Page 359

2. Click Show All. The Protocol Group Table displays. Figure 7-64. Protocol Group Table 3. Check Remove for the protocol groups you want to remove. 4. Click Apply Changes. The protocol is removed, and the device is updated. Configuring VLAN Protocol Groups Using CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • VLAN Commands The following table summarizes the equivalent CLI commands for this feature. Table 7-31. VLAN Protocol Group Commands CLI Command vlan protocol group vlan protocol group add protocol vlan protocol group name vlan protocol group remove Description Adds protocol-based VLAN groups to the system. Adds a protocol to a protocol-based VLAN. Adds a group name to a protocol-based VLAN Removes a protocol-base VLAN group. GVRP Parameters The GARP VLAN Registration Protocol provides a mechanism that allows networking switches to dynamically register (and de-register) VLAN membership information with the MAC networking switches attached to the same segment, and for that information to be disseminated across all networking switches in the bridged LAN that support GVRP. The operation of GVRP relies upon the services provided by the Generic Attribute Registration Protocol (GARP). GVRP can create up to 1024 VLANs. Configuring Switching Information 359