Dell PowerConnect 8024 User's Guide - Page 693

Defining Interface Configuration Using CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • QoS Commands The following table summarizes the equivalent CLI commands for this feature. Table 11-9. Interface Configuration Commands CLI Command traffic-shape Description Specifies the maximum transmission bandwidth limit for the interface as a whole. Interface Queue Configuration Use the Interface Queue Configuration page to define what a particular queue does by configuring switch egress queues. User-configurable parameters control the amount of bandwidth used by the queue, the queue depth during times of congestion, and the scheduling of packet transmission from the set of all queues on a port. Each port has its own CoS queue-related configuration. The configuration process is simplified by allowing each CoS queue parameter to be configured globally or per-port. A global configuration change is automatically applied to all ports in the system. To display the Interface Queue Configuration page, click Quality of Service →Class of Service → Interface Queue Configuration in the tree view. Figure 11-19. Interface Queue Configuration The Interface Queue Configuration page contains the following fields: • Interface - Specifies the Interface (Unit/Port, LAG, or Global) that's being configured. Configuring Quality of Service 693