Dell PowerConnect 8024 User's Guide - Page 139

• IPv6 Gateway - Enter the IPv6 gateway address (do not include a prefix). Use an IPv6 global or linklocal address format. • Add IPv6 Address - To add an IPv6 address, select Add so you can specify an address in the New IPv6 Address field. • New IPv6 Address - If Add is selected from the Add IPv6 Address field, enter an IPv6 prefix/length in this field. • EUI Flag - Select True if the last 64 bits are to be derived from the MAC address. For example, you can enter 2001::/64 and have the EUI Flag (True) use the 64-bit address calculated from the MAC address. Displaying IPv6 Address Management Information 1. Open the IPv6 Address Management page. 2. Click Show All to display the IPv6 Management Summary page. Figure 6-32. IPv6 Management Summary 3. To remove an IPv6 Address, select the Remove option associated with the address, and click Apply Changes. Viewing IPv6 Management Information Using CLI Commands For information about the CLI commands that perform this function, see the IP Addressing Commands chapter in the CLI Reference Guide. The following table summarizes the equivalent CLI commands you use. Table 6-21. Ipv6 Management Information Commands CLI Command ipv6 address ipv6 enable ipv6 gateway Description Use to display the entries in the ARP table. Enables IPv6 on the management interface. Configures an IPv6 gateway for the management interface. Configuring System Information 139