Dell PowerConnect 8024 User's Guide - Page 137

Click Clear All Entries to remove all Host Name IP Mapping entries from the table. Viewing Dynamic Host Entries Using CLI Commands For information about the CLI commands that perform this function, see the IP Addressing Commands chapter in the CLI Reference Guide. The following table summarizes the equivalent CLI commands you use. Table 6-19. Dynamic Host Entries Commands CLI Command show hosts Description Displays dynamic host entries that the switch has learned. ARP Table Use the ARP Table page to view ARP parameters for IP interfaces. The ARP table displays the correlation between each MAC address and its corresponding IP address. To display the ARP Table page, click System →IP Addressing →ARP in the tree view. Figure 6-30. ARP Table The ARP Table page contains the following fields: • IP Address - The station IP address, which is associated with the MAC address filled in below. • MAC Address - The station MAC address, which is associated in the ARP table with the IP address. Viewing the ARP Table Using CLI Commands For information about the CLI commands that perform this function, see the IP Addressing Commands chapter in the CLI Reference Guide. The following table summarizes the equivalent CLI commands you use. Table 6-20. ARP Table Commands CLI Command show arp switch Description Use to display the entries in the ARP table. Configuring System Information 137