Dell PowerConnect 8024 User's Guide - Page 654

Figure 10-29. OSPFv3 Route Redistribution Configuration The OSPFv3 Route Redistribution Configuration page contains the following fields: • Source Protocol - Select the type of source routes to configure for redistribution by OSPF. Valid values are Static and Connected. • Metric - Sets the metric value to be used as the metric of redistributed routes. This field displays the metric if the source was pre-configured and can be modified. Valid values are 0 to 16777214. • Metric Type - Sets the OSPF metric type of redistributed routes. • Tag - Sets the tag field in routes redistributed. This field displays the tag if the source was pre- configured, otherwise 0 is displayed. Valid values are 0 to 4294967295. • Redistribute - Enables or disables the redistribution for the selected source protocol. This field has to be enabled in order to be able to configure any of the route redistribution attributes. Configuring OSPFv3 Route Redistribution 1. Open the OSPFv3 Route Redistribution Configuration page. 2. Specify Create to set up a new configured source. Specify Connected or Static to modify an existing configured source. 3. Set up or modify the remaining fields as needed. 654 Configuring IPv6