Dell PowerConnect 8024 User's Guide - Page 169

• Accounting Mode - Use the menu to select whether the RADIUS accounting mode is enabled or disabled on the current server. • RADIUS Attribute 4 (NAS-IP Address) - To set the network access server (NAS) IP address for the RADIUS server, select the option and enter the IP address of the NAS in the available field. The address should be unique to the NAS within the scope of the RADIUS server. The NAS IP address is only used in Access-Request packets. Configuring Global RADIUS Settings Using CLI Commands For information about the CLI commands that perform this function, see the RADIUS Commands chapter in the CLI Reference Guide. The following table summarizes the equivalent CLI commands you use. Table 6-31. RADIUS Global Commands CLI Command radius-server attribute radius-server retransmit radius-server timeout show radius-servers Description Sets the network access server (NAS) IP address for the RADIUS server. Specifies the number of times the software searches the list of RADIUS server hosts. Sets the interval for which a switch waits for a server host to reply. Displays the RADIUS server settings. RADIUS Server Configuration From the RADIUS Server Configuration page, you can add a new RADIUS server, configure settings for a new or existing RADIUS server, and view RADIUS server status information. The RADIUS client on the switch supports up to 32 named authentication and accounting servers. To access the RADIUS Server Configuration page, click System →Management Security →RADIUS Server Configuration in the tree view. Configuring System Information 169