Dell PowerConnect 8024 User's Guide - Page 535

The following table summarizes the equivalent CLI commands for this feature. Table 9-17. OSPF Route Redistribution Configuration Commands CLI Command redistribute distribute-list out Description Configures OSPF protocol to allow redistribution of routes from the specified source protocol/routers. Specifies the access list to filter routes received from the source protocol. Route Redistribution Summary Use the OSPF Route Redistribution Summary page to display OSPF Route Redistribution configurations. To display the page, click Routing →OSPF →Route Redistribution Summary in the tree view. Figure 9-20. OSPF Route Redistribution Summary The OSPF Route Redistribution Summary page contains the following fields: • Source - The Source Route to be redistributed by OSPF. • Redistribute - Specify whether to allow the routes learned through this protocol to be redistributed. • Metric - The Metric of redistributed routes for the given Source Route. Displays 0 when not configured. • Metric Type - The OSPF metric type of redistributed routes. • Tag - The tag field in routes redistributed. This field displays the tag value if the source was preconfigured, otherwise 0 is displayed. • Subnets - Specify whether the subnetted routes should be redistributed (Enable) or not (Disable). Configuring Routing 535