Dell PowerConnect 8024 User's Guide - Page 533

Figure 9-19. OSPF Route Redistribution Configuration The OSPF Route Redistribution Configuration page contains the following fields: • Source - A protocol configured for OSPF to redistribute the routes learned through this protocol. Only source routes that have been configured for redistribution by OSPF are available. Possible values are Static, Connected, and RIP. • Metric - Sets the metric value for redistributed routes. This field displays a metric value if the source was preconfigured. The valid values are 0 to 16777214. • Metric Type - Select the OSPF metric type of redistributed routes from the drop-down menu. • Tag - Sets the tag field in routes redistributed. This field displays a tag value if the source was preconfigured, otherwise 0 is displayed. The valid values are 0 to 4294967295. • Subnets - Select whether the subnetted routes should be redistributed or not from the drop-down menu. • Distribute List - Selects the Access List that filters the routes to be redistributed by the destination protocol. Only permitted routes are redistributed. If this command refers to a non-existent access list, all routes are permitted. The drop-down menu lists the ACLs configured from the Switching→ Network Security→Access Control Lists→IP Access Control Lists pages. When used for route filtering, the only fields in an access list that get used are: - Source IP Address and netmask Configuring Routing 533