Dell PowerConnect 8024 User's Guide - Page 79
Configuring an Initial Telnet Password, ip http authentication
View all Dell PowerConnect 8024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Configuring an Initial Telnet Password To configure an initial Telnet password, enter the following commands: console(config)#aaa authentication login networkList line console(config)#aaa authentication enable networkList line console(config)#line telnet console(config-line)#login authentication networkList console(config-line)#enable authentication networkList console(config-line)#password pass1234 • When initially logging onto a switch through a Telnet session, enter pass1234 at the password prompt. • When changing a switch mode to enable, enter pass1234. Configuring an Initial HTTP Password To configure an initial HTTP password, enter the following commands: console(config)#ip http authentication local console(config)#username admin password user1234 level 15 Configuring an Initial HTTPS Password To configure an initial HTTPS password, enter the following commands: console(config)#ip https authentication local NOTE: You should generate a new crypto certificate each time you upgrade (install a new version of) the control software application on the switch. Enter the following commands once when configuring to use an HTTPS session over a console, a Telnet, or an SSH session. NOTE: In the Web browser enable SSL 2.0 or greater for the page content to appear. console(config)#crypto certificate 1 generate console(config)#ip https server NOTE: HTTP and HTTPS services require level 15 access and connect directly to the configuration level access. Configuring Dell™ PowerConnect™ 79