Dell PowerConnect Brocade M6505 Brocade 7.1.0 Fabric Watch Administrator's Gui - Page 111

Enabling or disabling threshold alarms for individual elements, PORT_LOG_LOCK

Get Dell PowerConnect Brocade M6505 PDF manuals and user guides View all Dell PowerConnect Brocade M6505 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 111 highlights

Fabric Watch Configuration Using Web Tools 9 • Click Custom Defined to specify new settings and proceed to the next step. 6. Select the check box for the type of notification method you want to use for each event type. The available alarm actions are: • ERROR_LOG • SNMP_TRAP • PORT_LOG_LOCK • EMAIL_ALERT 7. Click Apply. Enabling or disabling threshold alarms for individual elements To configure element-specific alarm settings, perform the following steps. 1. Open the Fabric Watch window. 2. In Fabric Watch Explorer, select a class. You can set alarms for information on a switch only if that information is monitored by Fabric Watch for that switch; not all alarm options are available for all switches. 3. Select the Threshold Configuration tab. 4. Under Area Selection, select the area with the alarms that you want to enable or disable. 5. Select the Element Configuration subtab. 6. Select an element from the Element Selection menu. 7. In the Status area: • To disable threshold alarms, click Disabled and click Apply. The threshold alarms are disabled and you do not need to continue with this procedure. • To enable threshold alarms, click Enabled and continue with the next step. 8. Select the Triggered behavior type to receive threshold alarms only when they are triggered by events that you defined. 9. Select a time interval in which to receive the threshold alarms from the Time Interval menu. 10. Click Apply. 11. Optional: Apply the selections on this panel to multiple elements simultaneously. a. Click Apply More. The Multiple Selection dialog box displays. b. Click the boxes next to the indices of all applicable elements. c. Click OK. Fabric Watch Administrator's Guide 91 53-1002752-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
Fabric Watch Administrator’s Guide
91
53-1002752-01
Fabric Watch Configuration Using Web Tools
9
•
Click
Custom Defined
to specify new settings and proceed to the next step.
6.
Select the check box for the type of notification method you want to use for each event type.
The available alarm actions are:
•
ERROR_LOG
•
SNMP_TRAP
•
PORT_LOG_LOCK
•
EMAIL_ALERT
7.
Click
Apply
.
Enabling or disabling threshold alarms for individual elements
To configure element-specific alarm settings, perform the following steps.
1.
Open the
Fabric Watch
window.
2.
In
Fabric Watch Explorer
, select a class.
You can set alarms for information on a switch only if that information is monitored by Fabric
Watch for that switch; not all alarm options are available for all switches.
3.
Select the
Threshold Configuration
tab.
4.
Under
Area Selection
, select the area with the alarms that you want to enable or disable.
5.
Select the
Element Configuration
subtab.
6.
Select an element from the
Element Selection
menu.
7.
In the
Status
area:
•
To disable threshold alarms, click
Disabled
and click
Apply
. The threshold alarms are
disabled and you do not need to continue with this procedure.
•
To enable threshold alarms, click
Enabled
and continue with the next step.
8.
Select the Triggered behavior type to receive threshold alarms only when they are triggered by
events that you defined.
9.
Select a time interval in which to receive the threshold alarms from the
Time Interval
menu.
10. Click
Apply
.
11.
Optional
: Apply the selections on this panel to multiple elements simultaneously.
a.
Click
Apply More
. The
Multiple Selection
dialog box displays.
b.
Click the boxes next to the indices of all applicable elements.
c.
Click
OK
.