Dell PowerConnect Brocade M6505 Brocade 7.1.0 Fabric Watch Administrator's Gui - Page 86
TABLE 18, FOP_Port and FCU_Port class default settings
View all Dell PowerConnect Brocade M6505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
7 portThConfig command procedures TABLE 18 Area FOP_Port and FCU_Port class default settings Description Default threshold settings Default alarm settings Threshold state Cyclic redundancy check (CRC) Monitors the number of CRC errors. Unit: Errors Time Base: minute Low: 0 High: 1000 Buffer: 100 Below: 0 Above: 0 Invalid transmission words (ITW) Monitors the number of invalid words transmitted. For Fabric OS versions 7.1.0 and later, the ITW counter includes a physical coding sublayer (PCS) violation. ITW violations can occur due to an ITW violation, a PCS violation, or both. Unit: Errors Time Base: minute Low: 0 High: 1000 Buffer: 100 Below: 0 Above: 0 Class 3 discards (C3TX_TO) Class 3 discards frames due to time out or destination unreachable. Unit: Errors Time Base: minute Low: 0 High: 5 Buffer: 0 Below: 0 Above: 0 Link loss Monitors the number of link failures. Unit: Errors Time Base: minute Low: 0 High: 500 Buffer: 50 Below: 0 Above: 0 Signal loss Monitors the number of signal loss errors. Unit: Errors Time Base: minute Low: 0 High: 5 Buffer: 0 Below: 0 Above: 0 Sync loss Monitors the number of loss of synchronization errors. Unit: Errors Time Base: minute Low: 0 High: 500 Buffer: 50 Below: 0 Above: 0 Protocol errors (PE) Monitors the number of primitive sequence errors. Unit: Errors Time Base: minute Low: 0 High: 5 Buffer: 0 Below: 0 Above: 0 Received packets (RXP) Monitors the receive rate, by percentage. Unit: Percentage (%) Time Base: minute Low: 0 High: 100 Buffer: 0 Below: 0 Above: 0 Informative Out_of_range Informative Out_of_range Informative Out_of_range Informative Out_of_range Informative Out_of_range Informative Out_of_range Informative Out_of_range Informative Informative 66 Fabric Watch Administrator's Guide 53-1002752-01